The size of the concrete base can vary depending on site conditions, so we always recommend consulting your contractor for tailored advice. As a general guideline for lampposts, we suggest the following:
• 500mm square base for Harte’s FF01 foundation frame.
• 300mm square base for the FF02 foundation frame.
• 1200mm base for the FF03 foundation frame.

Harte products are designed to accommodate E27 screw-in bulbs. For optimal efficiency and longevity, we highly recommend using LED bulbs.

While foundation frames are not strictly necessary, many installers find them incredibly helpful for simplifying the installation process. We recommend checking with your installer to see if they are needed for your project.

We supply high-quality Harte lighting products but do not currently offer installation services.

Although we don’t directly recommend electricians, we can guide you to a trusted platform where you can find qualified electricians in your area.
You can find local qualified electricians here:
• NICEIC Find a Contractor
• TrustMark Find a Tradesperson

Bolts are not included, as the appropriate type depends on the wall or surface you are working with. For lamppost installations, we recommend pairing them with one of Harte’s foundation frames.

The bolts required will depend on your specific installation site. We suggest consulting your installer for the best advice.

Yes, Harte products are compatible with chemical anchors. However, we recommend discussing the best method with your installer to ensure optimal results.

All Harte products come pre-wired with durable, 3-core cable, suitable for outdoor use.

The type of junction box required will depend on the conditions at your installation site. Your installer will be able to provide the best guidance.

Harte wall lights are designed for straightforward installation on any external wall. They can typically be bolted directly to the wall, but the exact method will depend on your site conditions. Your installer will have the best approach.

Harte cast iron lighting products are designed to last with minimal maintenance:
• Clean them twice a year with warm, soapy water.
• Replace bulbs as needed.
• Clean the glass and lens annually with warm soapy water, followed by a glass cleaner.
• Touch up paint as needed, and plan for a full repaint every 8-10 years.

Harte copper products are low-maintenance and lacquered to prevent oxidation:
• Clean them three times a year with warm soapy water.
• Polish with a soft dry cloth to maintain their shine.
• If necessary, touch up with lacquer paint from your local hardware store.

With proper care, Harte copper products can last indefinitely while maintaining their strength and elegance. Just follow our maintenance tips to keep them in top condition.

Always switch off the power before cleaning. Clean your lamp twice a year with warm soapy water, and clean the glass and lens annually. After washing, follow up with a glass cleaner for the best results. See our full maintenance guide above.

Yes, to keep your Harte copper lantern looking its best, clean it three times a year with warm soapy water and polish with a soft dry cloth.

This process varies depending on the product:
• Traditional, Heritage, Manor, Courtyard: Use a 10mm spanner to open the hex bolt.
• Goose Neck, Station Master: Loosen the wingnut by hand.
• Gate Lodge: Use a 5mm Allen key.
• Bare: Use an 8mm spanner.

Cast iron is incredibly durable and resistant to corrosion, making it perfect for outdoor use. While aluminium is lighter and less robust, cast iron can withstand the toughest conditions, much like the materials used in ship anchors.

Yes, all Harte products are designed for outdoor use and come with a minimum IP44 rating, ensuring they can handle wet conditions. Some of Harte's items even offer an IP65 rating for enhanced protection.

Please refer to our maintenance recommendations. In general, you should touch up paint as needed and plan for a complete repaint every 8-10 years.

You can clean the glass annually with warm soapy water, followed by a glass cleaner. This will help keep your fittings looking pristine. See our full maintenance guide for more details.

Yes, replacement glass is available for all of Harte lighting products. Just get in touch with us for more details.

Yes, all Harte products can be fitted with polycarbonate instead of glass if you prefer.

We suggest asking for a metal paint in RAL 9005 at your local hardware store. One brand Harte commonly use is Combi Colour. Make sure to consult with the store for advice on using thinners before applying the paint.